DG1230R08-04S1 [V001] Circular Connectors от TE Connectivity

Lifecycle status of the part, such as active or obsolete. Indicates availability and long-term support from the manufacturer. Check this before design-in to avoid last-time buys or supply disruptions. Verify with the datasheet or distributor for current status.

Identifies the company that designed and produced the component. Buyers often filter by manufacturer to ensure brand reliability, quality standards, and supply chain consistency. Verify the manufacturer against the datasheet and official packaging to avoid counterfeit parts.

Lists the product categories or classifications assigned to this component, such as connectors, capacitors, or modules. This helps in filtering and comparing similar parts. Review the categories to ensure the component fits your application and to find alternative parts in the same class.

Indicates the force needed to separate mated connectors, ensuring reliable mechanical connection. Compare values when selecting connectors for high-vibration or high-reliability applications. Verify against datasheet specifications to match your application's requirements.

Total number of contact positions in the connector. This determines the maximum number of electrical connections possible. Compare with your circuit requirements and verify against the datasheet to ensure the connector matches your pin count and layout.

Indicates the typical duration from order confirmation to shipment from the manufacturer's facility. This helps you plan production schedules and inventory. Verify current lead times with your distributor or supplier, as they may vary based on order quantity, product availability, and market conditions.

Indicates the specific product subcategories or classifications within the broader component family. Helps narrow down search results and identify the exact type of component needed for your design. Review the subcategory to ensure compatibility with your application.

Indicates the product series or family, grouping components with similar design and specifications. Helps identify compatible parts and compare within a product line. Verify the series against the datasheet to ensure correct application.

Indicates how many contact positions in the connector are dedicated to carrying power. Compare this with the total number of positions to ensure the connector meets your power and signal requirements. Verify against the datasheet for proper current rating per contact.

Indicates whether the component can be sealed to protect against moisture, dust, or other environmental factors. Relevant for connectors, switches, and enclosures used in harsh environments. Verify sealing capability with the manufacturer's specifications.

Indicates the total number of signal contacts or positions in a connector or socket. Compare this value with your required pin count to ensure proper mating and circuit routing. Always verify against the datasheet for exact configuration.

Specifies the mechanical method used to align mating connectors during engagement. This affects insertion force, durability, and ease of use. Verify the alignment type against your application requirements and the connector datasheet to ensure proper mating and reliable connection.

Specifies the maximum continuous current the contacts can safely carry without overheating or degradation. Compare this rating with your circuit's expected load to ensure reliable operation. Always verify against the datasheet for derating curves and ambient temperature conditions.

Specifies the typical circuit role or topology for which the component is designed, such as buck converter, audio amplifier, or signal conditioning. Engineers use this to quickly match parts to their application. Verify against the datasheet's recommended operating conditions and example circuits.

Specifies the minimum and maximum outer diameter of wire insulation that the connector or terminal can accommodate. Verify this range against your wire's insulation thickness to ensure a secure fit and reliable crimping, especially when using thick or multi-layer insulation.

Specifies which contact positions in a connector or socket are intentionally left unpopulated. Buyers and engineers use this to verify pinout compatibility with their mating harness or PCB layout. Always cross-check against the datasheet's pin assignment diagram before ordering.

Specifies the contact style within a circular connector, such as pin, socket, or coaxial. This determines mating compatibility and signal integrity. Verify the contact type against the connector series and datasheet to ensure proper pairing and reliable electrical connection.

Specifies the maximum alternating current voltage for continuous operation. Verify this rating against your application's supply voltage to ensure safe and reliable performance. Check the datasheet for derating curves and transient overvoltage limits.

Specifies the mechanical configuration of a feedthrough connector, such as solder cup, PCB mount, or wire wrap. This determines how the feedthrough integrates with your system. Verify compatibility with your board layout and assembly process before ordering.

Identifies the elastomer or polymer used for the O-ring seal. Material determines chemical compatibility, temperature range, and durability. Critical for connectors and enclosures exposed to harsh environments. Confirm with datasheet for sealing performance.

Keying is a mechanical feature that ensures connectors can only be mated in the correct orientation, preventing mismating and potential damage. Verify the keying type against your mating connector and application requirements to ensure proper assembly and reliable electrical connection.

Indicates the mechanical keying orientation of the connector housing to prevent mismating. Verify the code against the mating connector and panel layout to ensure correct alignment and avoid damage during assembly.

Indicates whether the connector has reversed gender, meaning the pin and socket arrangement is opposite to standard. This affects mating compatibility with cables and panel mounts. Verify against the datasheet to ensure correct pairing.

Specifies the mechanical feature used to secure a component to a panel, such as a flange, bracket, or threaded insert. This affects installation method and panel cutout requirements. Verify compatibility with your enclosure and mounting hardware before ordering.

Indicates the degree of sealing or coating against moisture, dust, and other environmental factors. Check this attribute to ensure the component meets the required IP rating or conformal coating standard for your application.

Indicates whether the backshell is pre-assembled at the factory. This affects assembly time and reliability. Verify with the datasheet to ensure the connector meets your environmental and strain relief requirements.

Specifies the plating on the connector shell, affecting corrosion resistance, conductivity, and solderability. Choose based on environmental exposure and mating cycle requirements. Verify with the datasheet for compatibility with your application.

Indicates the physical positions of keying and polarization features on a connector or housing. These features prevent mismating and ensure correct orientation during assembly. Verify against the datasheet or mating connector specifications to confirm compatibility and proper alignment.

Specifies the cross-sectional area of the conductor in square millimeters. This determines current-carrying capacity and voltage drop. Verify against the datasheet for proper connector or terminal compatibility and to ensure safe operation under expected load conditions.

Indicates the standard shell size designation for circular connectors, which determines the overall dimensions and mating compatibility. Verify the shell size against the connector series datasheet to ensure proper fit with the mating connector and panel cutout.

Specifies the physical arrangement of contacts within the connector housing, such as rows, columns, or circular patterns. This affects mating compatibility and PCB footprint. Verify against the datasheet to ensure proper alignment with your mating connector and board layout.

Specifies the physical orientation or method by which wires or cables enter the connector housing. This affects cable routing, strain relief, and overall assembly clearance. Verify compatibility with your wire harness and panel layout before selecting a connector.

Indicates the number of mating and unmating cycles the connector can endure before mechanical or electrical failure. Compare this rating when selecting connectors for frequent insertion applications. Verify against the datasheet for reliability expectations.

Specifies the method used to attach wires or contacts to the connector, such as crimp, solder, or insulation displacement. This affects assembly tooling, reliability, and field serviceability. Verify the recommended assembly process in the datasheet to ensure proper termination and avoid connection failures.

Indicates the mechanical shell configuration of the connector, such as standard, high-density, or waterproof. This affects mating compatibility, durability, and environmental sealing. Verify the shell type against the connector series datasheet to ensure proper fit and protection for your application.

Specifies the number of size 22D contacts in the connector. This helps determine the connector's pin count and compatibility with mating connectors. Verify against the datasheet to ensure the correct contact arrangement for your application.

Specifies the maximum continuous DC voltage the component can safely handle. Compare with your circuit's supply voltage to ensure adequate margin. Always verify against the datasheet's absolute maximum ratings and derating curves for reliable operation.

Specifies the mechanical method that holds a connector pair together after mating, such as latch, lock, or screw. This affects vibration resistance and ease of disconnection. Verify the retention type against the datasheet to ensure it meets your application's mechanical and safety requirements.

Specifies the component's ability to withstand exposure to oils, water, or chemicals without degradation. Essential for automotive, industrial, or outdoor applications. Verify the specific fluid type and test conditions in the datasheet to ensure compatibility with your operating environment.

Specifies the ambient temperature limits within which the connector reliably functions. Verify this range against your application's environmental conditions to ensure performance and longevity. Critical for automotive, industrial, and outdoor installations where temperature extremes occur.

Specifies the elastomer or polymer used for the connector's outer seal, protecting internal contacts from moisture, dust, and other contaminants. This material affects environmental sealing performance, chemical resistance, and operating temperature range. Verify compatibility with your application's exposure conditions and required IP rating against the datasheet.

Specifies the base material of the connector shell, affecting mechanical strength, corrosion resistance, and shielding effectiveness. Choose based on environmental exposure and mating cycle requirements. Verify against datasheet for compliance with industry standards.

Overall physical length of the assembled component, including connectors, housing, and any attached leads. Critical for mechanical fit in enclosures or PCB layouts. Always compare with your required clearance and mounting dimensions before ordering.

Specifies the standard or series of a circular connector, such as MIL-DTL-38999 or other industry types. This classification determines mechanical dimensions, contact arrangements, and environmental sealing. Verify the exact type against the datasheet to ensure compatibility with mating connectors and application requirements.

Specifies the degree of protection against dust, moisture, and other environmental factors, often indicated by an IP rating. Compare ratings when selecting components for harsh or outdoor conditions, and verify the exact rating in the datasheet.

Specifies the number of components supplied per reel, tube, tray, or other package. Buyers use this to plan order quantities and production runs. Verify against the datasheet or packaging specification to ensure the quantity matches your assembly needs.

Indicates if the connector is hermetically sealed to prevent ingress of moisture, gases, or contaminants. Critical for harsh environments, aerospace, medical, or automotive applications. Verify sealing method and compliance with IP ratings or MIL-SPEC standards in the datasheet.

Specifies how the connector attaches to the system, such as panel mount, PCB mount, or cable mount. This affects mechanical stability, assembly process, and suitability for your application. Verify the mounting type against your enclosure and PCB layout before ordering.

Specifies the fluid that the connector is designed to withstand, such as oil, coolant, or fuel. Verify compatibility with your application's media to prevent corrosion or seal failure. Check the datasheet for exact ratings.

Specifies the mechanical provisions that allow a component to be mounted on a panel, such as flanges, threads, or snap-in clips. This attribute helps engineers determine if the part can be securely fastened to an enclosure or chassis. Verify the exact mounting style against the datasheet to ensure compatibility with your assembly process.

Indicates if the connector has a metallic shield to protect against electromagnetic interference. Choose shielded types for noise-sensitive applications. Verify the shield's grounding and coverage in the datasheet to ensure effective EMI suppression.

Indicates the cross-sectional area of the conductor in American Wire Gauge. Compare this value with your application's current-carrying capacity and voltage drop requirements. Verify the exact gauge against the datasheet to ensure proper connector or terminal compatibility.

Shows whether the connector contacts are preloaded in the housing before termination. Preloaded contacts simplify assembly and reduce insertion force, but verify compatibility with your wire gauge and tooling for reliable crimping.

Specifies the thickness of the mounting panel for which the component is designed. Verify this dimension against your enclosure or panel cutout to ensure proper fit and sealing. Critical for connectors, switches, and indicators that mount through a panel.

Specifies the rated root mean square voltage for continuous operation. Compare this value with your circuit's nominal voltage and derating requirements. Always verify against the datasheet for absolute maximum ratings and environmental conditions.

Check if the connector has a keyed alignment feature to prevent mismating. This is critical for ensuring correct orientation during assembly and avoiding damage to pins. Verify against the datasheet for your specific connector series.

The unique part number assigned by the original component manufacturer. Use this to cross-reference datasheets, verify specifications, and ensure the exact component matches your design requirements. Always confirm the number against the manufacturer's official documentation.

Specifies the dielectric material used to insulate contacts in circular connectors. This affects thermal resistance, voltage rating, and durability. Engineers should verify the material against application requirements for temperature, humidity, and chemical exposure, and confirm it meets relevant safety standards.

Indicates how the connector or contact attaches to a wire or PCB, such as crimp, solder, or press-fit. Choose the method that matches your assembly process and reliability requirements. Verify compatibility with your wire gauge or board thickness in the datasheet.

Indicates whether the component complies with the EU RoHS directive restricting hazardous substances. Buyers should verify this status for regulatory compliance and market access. Check the datasheet or certificate for exact compliance details.

Identifies the connector system or series, such as a specific product family or standard. This helps engineers match mating connectors and ensure compatibility within a system. Verify the exact system against the datasheet to avoid mismatches in your design.

Select the category that best describes this electronic component, such as capacitor, resistor, diode, or connector. This classification helps you filter and compare similar parts. Verify the exact type against the datasheet to ensure it matches your application requirements.